[SN W12100019] USED SCHECTER / Diamond Series / HELLRAISER AD-HR-EX-BASS-4 STBLS [12]

From the listing

Seller's description

We’ve just received the 4-string bass from the Diamond series, which is designed specifically for the metal scene. This 4-string bass from the HELL RAISER Extreme series stands out within the Diamond lineup for its exceptionally luxurious appearance. It features a 5-piece maple/walnut through-neck construction with mahogany body wings, a quilted maple veneer on the arched-top body, and is equipped with two EMG-HZ humbucker pickups. It delivers the low-noise, tight, and powerful sound demanded by metal and loud rock genres, thanks to its through-neck construction, which produces a rich, full-bodied tone, along with a high-rigidity bridge, active EMG pickups, and a 3-band EQ. There are minor buckle scratches. There are scattered fine scratches and dents throughout the body, and the hardware shows some tarnish. Although it shows some signs of use, it has been fully serviced and cleaned at our repair center, and playability is excellent. Condition Grade: B+: Some scratches present, but no issues with normal use Serial Number: W12100019 Country of Manufacture: South Korea Case: Genuine soft case Weight: 4.03 kg Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems Remaining Fret Life: Within normal range; fret height is sufficient for playing String height (low-string side): 2.5 mm at the 12th fret String Action (Treble Side): 2.0 mm at the 12th fret Nut width: 38.1 mm Neck thickness near the 1st fret: 19.9 mm Neck thickness near the 12th fret: 22.5 mm Scale: 864 mm (34") RADIUS: 356 mm (14") Strings at Setup: D'Addario EXL165 / .045-.105 set Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling * As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance. * Any listed measurements for the truss rod, remaining fret height