[SN KI2246113] USED Killer / KG-Exploder II BIB Black Satin [12]

From the listing

Seller's description

A jet-black KG equipped with LACE Aluminum Tone pickups as standard has arrived. Developed as a model honoring Akira Takasaki of LOUDNESS, the Explorder is popular for its excellent value while carrying on the concept of the flagship Prime model. This BIB comes standard with coil-less Lace Almitone pickups, delivering overwhelmingly low noise and a wide dynamic range. The bridge pickup features a high-output Deathbucker, characterized by rumbling lows and crisp highs, making it ideal for metal sounds. There is a small chip in the paint at the tip of the headstock. The body has fine scratches and minor dents, as well as a slight gloss in the paint between the pickups on the top of the body and scattered minor scratches around the toggle switch. It shows minimal signs of use and is in good condition; it has been fully serviced and cleaned at our repair center, and playability is excellent. Condition Grade: B+: Some minor scratches, but no issues for normal use Serial Number: KI2246113 Year of Manufacture: 2022 Case: Genuine soft case Accessories: Lock pin, tonearm Weight: 3.98 kg Truss Rod: No issues; rod movement up to 60 degrees to the left and right has been verified and is within normal limits Fret Wear: Within normal range; fret height is sufficient for playing String Height (Low-String Side): 2.0 mm at the 12th fret String action (treble side): 1.5 mm at the 12th fret Nut width: 42.0 mm Neck thickness near the 1st fret: 20.8 mm Neck thickness near the 12th fret: 23.6 mm Scale: 648 mm (25.5") RADIUS: 305 mm (12") Strings at Setup: D'Addario EXL120 / .009-.042 set Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, shim adjustment (lock nut) * As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance. * Any listed measurements for the truss rod,