[SN K3000162] USED Killer / KG-Fascist Skid Blue [4.04 kg] Killer [08]

From the listing

Seller's description

Along with the Prime and Pirates, the KG-Fascist is one of KILLER GUITARS’ flagship models. It features an ash body, a maple asymmetrical V-shaped neck with a semi-deep-insert joint, a figured maple fingerboard, KILLER LQ-500 & LZ-510 Dyna-Bite pickups, a Floyd Rose tremolo, Schaller-style compatible strap pins, and a simple control layout consisting of a volume knob, pickup selector, and direct switch. This Luke Takakura model is characterized by a shape that offers a great fit and excellent playability, and it’s known for its well-defined tone that doesn’t get lost even in driven sounds. There are signs of wear (scratches, playing lines, picking marks, tarnish or pitting on metal parts and screws, and other cosmetic damage). It was set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and fret leveling). The frets are at a height that poses no issues for playing, and the truss rod can be adjusted in both directions; operation has been confirmed up to ±60°. Condition Grade: B+: Some scratches, but no issues with normal use Serial Number: K3000162 Country of Manufacture: Japan Case: Soft case Accessories: Locking pins, wrench, tremolo arm Weight: 4.04 kg Truss Rod: No issues; rod movement confirmed up to 60 degrees in both directions with no problems Remaining Fret Life: Within normal range; fret height is sufficient for playing String Height (Low String Side): 2.0 mm at the 12th fret String height (treble side): 1.5 mm at the 12th fret Neck Shape: Asymmetrical V Scale: 648 mm (25.5") Radius: 305R Strings at Setup: ERNIE BALL 2223 / .009-.042 set Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling * Please note that as this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. * Any listed measurements for the truss rod