[SN 8241J] USED Varita Custom Guitar / Soltar Standard 5053 Stone Wash Blue [06]

From the listing

Seller's description

We've just received a used Varita Custom Guitar Soltar Standard 5053! It features a two-piece alder body paired with a maple neck and rosewood fingerboard in a satin finish. It features a Wilkinson VS-100 bridge, Gotoh SG381-078HC tuners, and a pickup configuration consisting of a Raw Vintage RV-PAF in the front, a Raw Vintage RV-60rwrp in the middle, and a Raw Vintage RV-PAF in the rear. With a 5-way selector switch, two tap switches, and tone knobs that can be pulled to engage the front or rear pickups, this guitar offers a wide range of tone-shaping possibilities. Due to the thin finish on the body, there are scattered scratches and dents, as well as numerous fine scratches around the bridge. It has been cleaned, fully adjusted, and had its frets leveled since arrival. Condition Grade: B+: Some scratches are present, but the guitar is in good working condition for normal use. Serial Number: 8241J Case: Hard Case Accessories: Spec sheet, tremolo arm Weight: 3.50 kg Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems Remaining Fret Life: Within normal range; fret height is sufficient for playing String Height (Low String Side): 2.0 mm at the 12th fret String Action (Treble Side): 1.5 mm at the 12th fret Strings at Setup: ERNIE BALL 2221 / .010-.046 set Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string action adjustment, fret leveling * As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance. * Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity. These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when