[SN 13912] USED LARRIVEE / 1993 C-10 TIGER [05]

From the listing

Seller's description

A rare C-10 with tiger inlay has arrived! "LARRIVEE" is a prestigious brand founded by Canadian master luthier John Larrivee. The "C-10," Larrivee's signature model, features a spruce top and rosewood sides and back, along with a sharp, deep Florentine cutaway. The fingerboard features "Torch & Wing" inlays, while the headstock is adorned with a rare tiger inlay—a design that stands out among the brand’s many options. Judging by the serial number, this guitar was likely produced during the period when the company was based in North Vancouver. Beyond its luxurious appearance, you can still enjoy its exceptional craftsmanship, with deep bass tones and sparkling treble that resonate clearly without distortion. There are traces of a past pickup installation, and the strap pin hole at the body end has been enlarged to accommodate a larger-diameter strap pin. There are scattered fine dents and scratches across the body, indicating signs of use, but it has been adjusted and cleaned by our expert staff and is in good playing condition. Condition Grade: B+: Some minor scratches, but no issues for normal use Serial Number: 13912 Year of Manufacture: 1993 Country of Manufacture: Canada Case: Hard Case Accessories: None Truss Rod: No issues; checked up to 60 degrees left and right with no problems Fret Wear: About 70-80% remaining String height (low string side): 2.5 mm at the 12th fret String height (treble side): 2.0 mm at the 12th fret Nut width: 44mm * As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance. * Any measurements listed for the truss rod, remaining fret life, or string action were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity. These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be