[SN 090] USED JOE BARDEN / JBT-1 [06]

From the listing

Seller's description

We've just received a used JOE BARDEN JBT-1! It appears to be a TL model manufactured by PGM. It features an ash body, maple neck, and rosewood fingerboard. It’s equipped with a bridge bearing the Joe Barden engraving. The front pickup has been replaced, and the pickguard has been replaced (the holes have been re-drilled). Metal parts such as the tuning pegs show signs of tarnish and rust; the wooden body has numerous dents and chips; and there are scattered buckle marks and scratches. There are noticeable dents and chips in the wood on the lower part of the body top and the back of the body. There are fine scratches on the fingerboard that appear to have been caused by fingernails. There is overall damage, including stand marks visible on the back of the neck and the body end. The guitar has been cleaned, fully adjusted, and had its frets leveled since arrival. Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use Serial Number: #090 Case: Semi-hard case Weight: 3.47 kg Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining) Fret Wear: Within normal limits; fret height is sufficient for playing String Height (Low String Side): 2.0 mm at the 12th fret String Height (Treble Side): 1.5 mm at the 12th fret Strings at Setup: ERNIE BALL 2221 / .010-.046 set Modifications: 2 pickups Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string action adjustment, fret leveling * As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance. * Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity. These measurements are intended as a reference at the