[SN V074857] USED FENDER USA / American Vintage '57 Stratocaster Maple 3-Tone Sunburst [03]

From the listing

Seller's description

A used FENDER USA / American Vintage '57 Stratocaster Maple 3-Tone Sunburst has arrived. Included accessories: Genuine hard case (case key missing), tremolo arm, bridge cover, two tremolo springs, and manuals. The frets have been leveled, so the guitar is in excellent playing condition and ready for use. Due to the lacquer finish, there are several minor scratches on the body. There is a small chip in the finish next to the neck plate, and some paint bleeding on the lower back and sides of the body. Other than that, there are no major damages or paint chips. While there are signs of use, including discoloration on the pickguard, we have restrung this guitar with new strings after it arrived at our shop and our repair department has cleaned, maintained, and set up all parts. Condition Grade: B+: Some minor scratches, but no issues for normal use Serial Number: V074857 Year of Manufacture: 1995 Country of Manufacture: USA Case: Hard Case (Case key missing) Accessories: Arm, bridge cover, 2 tremolo springs, manuals Weight: 3.46 kg Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (limited travel remaining) Fret Wear: Note: While the frets can still withstand filing, they are on the low side String Height (Low-String Side): 2.0 mm at the 12th fret String Action (Treble Side): 1.5 mm at the 12th fret Nut width: 42.4 mm Neck thickness near the 1st fret: 20.9 mm Neck thickness near the 12th fret: 23.0 mm Scale: 648 mm (25.5") Radius: 184 mm (7.25") Strings at setup: ERNIE BALL 2221 / .010-.046 set Modifications: Added PU rubber and all back panel screws Repair and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and fretting surface dressing * As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance. * Any specifications listed regarding the truss rod