[SN R009482] USED Fender Japan / ST66G-98TX Black [20]

From the listing

Seller's description

The ST66G-98TX, part of Fender Japan’s Vintage Collection. A rare model featuring a large-head maple neck with a round-inlaid fingerboard set onto an alder body, finished with gold hardware. It is equipped with Texas Special pickups, and the nut width measures 41.0 mm. There are several small dents accompanied by paint cracks on the body top and near the corners of the body back, and the hardware shows signs of tarnish, fine rust, and thinning plating. There are overall scratches and small dents. Condition: B+: Some scratches, but no issues for normal use Serial Number: CIJ R009482 Year of Manufacture: 2004-2006 Country of Manufacture: Japan Case: Non-genuine soft case Accessories: Arm Weight: 3.78 kg Truss Rod: Note: The truss rod is completely loose; currently, there are no issues with the neck Fret Wear: Within normal range; fret height is sufficient for playability String height (low string side): 2.0 mm at the 12th fret String height (treble side): 1.5 mm at the 12th fret Nut width: 41.0 mm Neck thickness near the 1st fret: 21.2 mm Neck thickness near the 12th fret: 23.7 mm Scale: 648mm (25.5") Radius: 184mm (7.25") Strings at setup: ERNIE BALL 2221 / .010-.046 set Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling * As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance. * Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity. These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location. * This item is a one-of-a-kind product currently listed simultaneously on multiple pla