[SN P086125] USED Fender Japan / JB75-90US NAT/M [4.41 kg / Manufactured 1999–2002] Fender Japan [08]

From the listing

Seller's description

This is a Fender Japan Jazz Bass JB75-90US, manufactured between 1997 and 2000. A Jazz Bass featuring US-made pickups that faithfully recreates the classic ’75 style. It features an ash body, maple neck, block inlays and neck binding, a three-point joint, a bullet truss rod cap, and J-BASS VINTAGE (USA) pickups. This instrument boasts a tight low end from the ash and maple construction, making it a valuable asset for recording as well. Although there are signs of use (such as minor scratches, scuffs, wear marks, wipe marks, picking marks, and tarnish on metal parts), it is in good condition. It was set up upon arrival (nut slot correction, cleaning, string replacement, truss rod adjustment, octave adjustment, and action adjustment); the frets are at a height that poses no problem for playing, and the truss rod can be adjusted in both directions and has been tested to operate up to ±60°. Condition Grade: B+: Some minor scratches, but no issues for normal use Serial Number: P086125 Year of Manufacture: 1999–2002 Country of Manufacture: Japan Case: Soft case Accessories: Wrench Weight: 4.41 kg Truss Rod: No issues; rod movement up to 60 degrees to the left and right has been verified and is normal Remaining Fret Life: Within normal range; fret height is sufficient for playing String Height (Low String Side): 2.5 mm at the 12th fret String height (treble side): 2.0 mm at the 12th fret Nut width: 38.2 mm Neck thickness near the 1st fret: 21.0 mm Neck thickness near the 12th fret: 24.6 mm Scale: 864 mm (34") RADIUS: 184 mm (7.25") Strings at Setup: D'Addario EXL165 / .045-.105 set Repairs and Maintenance: Nut slot correction, cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment * As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance. * Any listed measurements for the truss rod, remaining fret