[SN MIJ U050033] USED FENDER JAPAN / ST62-TX Burgundy Mist Metallic Matching Head [06]

From the listing

Seller's description

The Fender Japan ST62-TX has arrived!! This model, based on the 1962 Stratocaster, is manufactured in Japan. Featuring the classic ’60s specs—an alder body, maple neck, and rosewood fingerboard—it’s equipped with USA-made Texas Special pickups. While it’s a ’62-style guitar, it features a single-ply white pickguard and a burgundy matching headstock, giving it a look reminiscent of that famous player’s beloved guitar. There is a small chip in the finish near the neck pocket, some scratches around the pickguard knobs, and a single crack in the back panel; however, it is in relatively good condition with no major or conspicuous damage. Condition Grade: B+: Some minor scratches, but no issues for normal use Serial Number: MIJ U050033 Country of Manufacture: Japan Case: Soft case Accessories: Tremolo arm Weight: 3.62 kg Truss Rod: No issues; rod movement up to 60 degrees to the left and right has been verified and is normal Remaining Fret Life: Within normal range; fret height is sufficient for playing String Height (Low String Side): 2.0 mm at the 12th fret String action (treble side): 1.5 mm at the 12th fret Nut width: 42.1 mm Neck thickness near the 1st fret: 20.4 mm Neck thickness near the 12th fret: 22.5 mm Scale: 648 mm (25.5") RADIUS: 184 mm (7.25") Strings at Setup: ERNIE BALL 2223 / .009-.042 set Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string action adjustment * As this is a used item, there may be scratches, dents, and other imperfections not visible in the photos or not listed here. Please be aware of this in advance. * Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity. These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arr