[SN MIJ JD24025193] USED FENDER MADE IN JAPAN / Traditional II Late '60s Stratocaster MN Black [03]

From the listing

Seller's description

Fender's popular "Traditional II" series, made in Japan. We’ve just received a used Stratocaster from this series that reproduces the specifications of the late 1960s! While it has some minor scratches and signs of use, there is no damage that would affect its playability. Please take this opportunity to check it out. ・Minor scratches on the headstock and neck ・Scratches on the fingerboard (near the high frets on the 1st string side) ・Minor scuffs, buckle marks, and dents on the body Includes original soft case, tremolo arm, and manual Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use Serial Number: MIJ JD24025193 Year of Manufacture: 2024 Country of Manufacture: Japan Case: Soft case Accessories: Genuine soft case, arm, manual Weight: 3.42 kg Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining) Fret Wear: Within normal range; fret height is sufficient for playing String Height (Low String Side): 2.0 mm at the 12th fret String action (treble side): 1.5 mm at the 12th fret Nut width: 41.24 mm Neck thickness near the 1st fret: 22.21 mm Neck thickness near the 12th fret: 23.41 mm Scale: 648 mm (25.5") Radius: 241 mm (9.5") Strings at Setup: ERNIE BALL 2223 / .009-.042 set Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, wiring repair * As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance. * Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity. These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical whe