FENDER MEXICO Player II Modified Telecaster SH 3-Tone Sunburst [MX25051787] (06/12)

From the listing

Seller's description

We've just received a used FENDER MEXICO Player II Modified Telecaster SH 3-Tone Sunburst! Made in Mexico in 2025. The Player II Modified Telecaster SH is a classic guitar designed with the modern player in mind. It features an alder body, a maple neck with a Modern "C" shape, and a rosewood fingerboard with a 9.5-inch radius. It is equipped with a Player II Modified Humbucker in the front and a Player II Noiseless Tele in the rear. The rear pickup can be coil-tapped by pulling up the tone control. While there are some minor scratches, dents, and tarnish on the metal parts, it is in good condition for a used item. It has been cleaned and fully adjusted upon arrival and is in perfect playing condition. Condition Grade: B+: Some minor scratches, but no issues for normal use Serial Number: MX25051787 Year of Manufacture: 2025 Country of Manufacture: Mexico Case: Soft case Weight: 3.61 kg Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems Fret Wear: Within normal range; fret height is sufficient for playing String height (low string side): 2.0 mm at the 12th fret String height (treble side): 1.5 mm at the 12th fret Nut width: 40.8 mm Neck thickness near the 1st fret: 21.3 mm Neck thickness near the 12th fret: 21.5 mm Scale: 648mm (25.5") Radius: 241mm (9.5") Strings at setup: ERNIE BALL 2221 / .010-.046 set Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment * As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance. * Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity. These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the