FENDER 1972 Precision Bass Sunburst [375292] (08/12)

From the listing

Seller's description

A 1972 Fender Vintage Precision Bass has arrived! The classic combination of an alder body and a round-inlaid rosewood fingerboard. The neck is slim yet has just the right amount of thickness, making it easy to play and delivering a punchy sound. Overall, it shows signs of wear typical for its age, including scratches, paint chipping, weather checking, rust on metal parts, and some discoloration. Since the pickup output was low upon arrival, the windings were rewound to correct this; the pots are original but have been solder-repaired. The fingerrest is not original, and the pickup and bridge fences are missing. There are splinters at the ends of the frets on the fingerboard, so itfs likely that the frets have been refretted. The nut has been replaced, the neck has been leveled, and the guitar has been fully adjusted. Serial Number: 375292 Neck Date: 5SEP72B Pot Date: Appears to be 304 7244. PU Date: 204072 Condition: B+: Has some minor scratches but is in good condition for normal use Serial Number: 375292 Year of Manufacture: 1972 Country of Manufacture: United States Case: Hard Case Weight: 3.84 kg Truss Rod: No issues; rod movement confirmed up to 60 degrees to the left and right with no problems Fret Wear: Some defects present; replacement should be considered during the next repair String Height (Low String Side): 2.5 mm at the 12th fret String Action (Treble Side): 2.0 mm at the 12th fret Nut width: 41.1 mm Neck thickness near the 1st fret: 21.5 mm Neck thickness near the 12th fret: 24.7 mm Scale: 864 mm (34") RADIUS: 184 mm (7.25") Strings at Setup: D'Addario EXL165 / .045-.105 set Modified part: Nut Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, leveling, coil rewinding * As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance. * Any listed measurements for the truss rod,